Visita KITCO en español
Sales/ Toll free: (888) 548-2636  |  Training/ Toll free: (866) 643-5220 | Out of U.S.: (757) 518-8100  |  Fax: (757) 518-9700
Our Company   |   News and Events   |   Employment   |   NSN   |   MSDS   |   Catalogs   |   Directions   |   Partners   |   SeaPort-e   |   Site Index
KITCO Fiber Optics
Join Our Email List
Email:
Expert in Fiber Optics Training, Field Services Tool Kits & Cable Assemblies
 
Tools and Tool Kits

Ovens and Accessories
SORT BY:   
 
Page:  1  2 
Displaying 1 - 10 of 17
14 Dual-Purpose (Epoxy/HotMelt™)
PART#: 0700-9150
com

KITCO’s line of UL listed Epoxy fiber optic ovens are designed to cure epoxy or soften pre-loaded adhesive inside a fiber optic connector. Small and lightweight for easy portability, these ovens are perfect for any job site, and are designed with the installer in mind. While many ovens take up to 30 minutes to reach proper curing temperature, Epoxy ovens are ready in less than four minutes! The aluminum heater block transfers the precise heat needed to cure most fiber optic epoxies, while keeping the housing cool to ensure a rapid cool down. A detachable BME power cord allows for easy storage inside a termination kit. Both the Epoxy 8-port and the 3M HotMelt™ 6-port ovens are also now available with 230VAC power cords designed to accommodate most European power outlets. Made of rugged steel and powder-coat painted for durability, these ovens will last for many years.

The Dual-Purpose Oven includes an 8 port epoxy heater block and a 6 port HotMelt™ heater block, each with its own switch and set to its own precise temperature. Finally an installer can use one oven for both epoxy and HotMelt™ applications!

Factory set at 90°C for epoxy curing and 260°C for HotMelt™ curing, this oven is perfect for the 3M HotMelt™ connector and all epoxy connectors.
  
Aviation Programmable Oven
PART#: 0721-1305
new mil

The 0721-1305 Aviation Programmable Oven is designed to cure aerospace fiber optic epoxies using a 4 step temperature cure schedule. The oven is pre-programmed with the NAVAIR cure schedule for Epo Tek 353ND epoxy. The cure schedule can be easily changed to meet your epoxy cure temperature requirements. The ramp time, soak time, and cure temperature can be changed within the cure schedule program.
The oven comes with a redesigned heating block which will accommodate up to 36 fiber optic connectors/termini at the same time. The block will cure 12 of the ST,SC, FC or LC connectors and 24 fiber optic termini.

The following is a list of the fiber optic termini that will fit in the heating block:
• M29504/04 Pins
• M29504/05 Sockets
• M29504/14 Pins
• M29504/15 Sockets
• ARINC 801
• Elio (EN 4531)

  
Aviation Programmable Oven Cure Adapter
PART#: 0721-1115
mil

Use this 1.6,, cure adapter to protect the M29504/04 and M29504/5 termini and fiber while curing in our 0721-1305 programmable oven.
  
Cable Clamp
PART#: 0701-4060
NSN#: 5340-01-422-2168
mil

Use this cable clamp with the following ovens: 0700-9100, 0701-4000, 0701-4005 and 0701-4015.

  
Cable Stand Post
PART#: 0701-4030
NSN#: 6070-01-430-4607
mil

Use this cable stand post with the following ovens: 0700-9100, 0701-4000, 0701-4005 and 0701-4015.

  
Cable Stand Ring
PART#: 0701-4040
NSN#: 5365-01-420-3692
mil

Use this cable stand ring with the following ovens: 0700-9100, 0701-4000, 0701-4005 and 0701-4015.

  
Curing Oven
PART#: 0701-4010
NSN#: 4430-01-419-6384
mil

KITCO Fiber Optics was tasked by NAVSEA Combat Systems in 1992 to produce an oven that would allow the shipboard installer to accomplish a vertical cure for the MIL-C-83522/16 Light Duty ST Connector, the MIL-PRF-29504/14/14 Heavy Duty Termini and the COTS FDDI Connector. A higher curing temperature of 248° Fahrenheit assures a higher glass transition temperature needed for high vibration and harsh shipboard environments. Special side panels are affixed to the oven housing to hold the 16 termini cure adapters that come with this assembly.

Note: This oven does not come with a heater block, cable stand, post, clamps or rings.
  
Curing Oven
PART#: 0701-4005
mil

KITCO Fiber Optics was tasked by NAVSEA Combat Systems in 1992 to produce an oven that would allow the shipboard installer to accomplish a vertical cure for the MIL-C-83522/16 Light Duty ST Connector, the MIL-PRF-29504/14/14 Heavy Duty Termini and the COTS FDDI Connector. A higher curing temperature of 248° Fahrenheit assures a higher glass transition temperature needed for high vibration and harsh shipboard environments.

Note: This oven does not come with side panels, heater block, cable stand, post, clamps or rings. If side panels are needed, use our part number 0701-4010.

  
Curing Oven Assembly
PART#: 0701-4000
NAVSEA#: 7085185-19, 6872813-19, 7325763-13
mil

KITCO Fiber Optics was tasked by NAVSEA Combat Systems in 1992 to produce an oven that would allow the shipboard installer to accomplish a vertical cure for the MIL-C-83522/16 Light Duty ST Connector, the M29504/14 and M29504/15 termini and the COTS SC Connector. A higher curing temperature of 248 degrees Fahrenheit assures a higher glass transition temperature needed for high vibration and harsh shipboard environments. A special heater block accepts termini when in one position and when flipped over the same heater block accepts ST, SC and/or FDDI Connectors. A solid post, a ring and cable clamps allow the installer to precisely position the fiber into the block for a straight, vertical cure. Special side panels are affixed to the oven housing to hold the 16 termini cure adapters that come with this assembly.
  
Dual HotMelt™/Epoxy Oven w/Automatic Shutdown
PART#: 0700-9151
new mil

The 0700-9151 Epoxy curing oven was designed specifically for the US Marines. This oven has an auto shut off feature that will turn off the oven after two hours. The oven has a warning indicator light built into the cover to warn the Warfighter that the oven chassis is too hot to touch or to put the oven into the termination kit. The oven also features indicator lights to let the Warfighter know which oven section is turned on.
  
Legend: com = Commercial | mil = Military | new = New Product
 
Page:  1  2 
Displaying 1 - 10 of 17


 
 
     
 
© 2011 KITCOFO.com l All Rights Reserved.
Home  |  KITCO Employee Portal  |  KITCO Business Portal
  Admin Field Services Commercial Tools & Tool Kits Military Tools & Tool Kits All Tools & Tool Kits
  Home
Company
Request Information
NSN
MSDS
Catalogs
Directions
Partners
Overview
Qualifications
Portfolio
Commercial Connector Terminations
Military Connector Terminations
Testing and Troubleshooting
Fusion and Mechanical Splicing
Blown Optical Fiber (BOF)
Technical Support
New Commercial Products
Accessories
Connectors
Consumables
Test and Inspection Equipment
Ovens and Accessories
Kits
Tools
New Military Products
Accessories
Connectors
Consumables
Test and Inspection Equipment
Kits
Tools
New Products
Accessories
Connectors
Consumables
Test and Inspection Equipment
Ovens and Accessories
Kits
Tools
MQJs
 
5269 Cleveland Street Suites 108 & 110, Virginia Beach, VA 23462  •  2500 Hoover Avenue Suites I & J, National City, CA 91950
Sales/ Toll free: (888) 548-2636  •  Training/ Toll free: (866) 643-5220  •  Out of U.S.: (757) 518-8100  •  Fax: (757) 518-9700
Registered Small Business; DCAA Approved Accounting & Purchasing System;
NAVSEA Approved Quality Management System   •   ISO 9001:2000 Certified
Web Design Company VISIONEFX