Fiber Optic Termination Experts

Accessories

SORT BY:

Page:

1 2 3 4 5 6

Displaying 1 - 10 of 58

1.25mm Light Source Adapter Cap
PART#: 0799-2091
new mil com

The 1.25mm red adapter cap is designed to work with the 0700-8500 FiberSure Light Source. Works with the any SFF (Small Form Factor) connector - LC, MU, MT-RJ.

1.60mm Light Source Adapter Cap
PART#: 0799-2092
new mil com

The 1.60mm blue adapter cap is designed to work with the 0700-8500 FiberSure Light Source. Works with the M29504/4 and M29504/5 aviation style termini.

2.5mm Light Source Adapter Cap
PART#: 0799-2090
mil com

The 2.5mm white adapter cap is designed to work with the 0700-8500 FiberSure Light Source. Works with the any 2.5mm ferulle connector - ST, SC, FC.

4 Fiber Furcation Unit
PART#: 0705-8120
mil

KITCO Fiber Optics now manufactures U. S. Navy Shipboard approved furcation units. These units consist of low smoke, zero halogen 2.4 mm furcation tubing that surrounds Kevlar® and a 650 mm (ID), 900mm (OD) hollow tube. One end of the unit is strain relieved with polyethylene tubing, shrink tubing and an aggressive epoxy. An 8 mm Blown Optical Fiber tube is also epoxied inside the shrinkable tubing to allow the installer to couple the furcation unit with the existing duct work. After sliding the 500 mm Blown Optical Fiber down the hollow tube the installer can utilize the Kevlar®and jacket to properly connectorize shipboard ST and SC connectors in accordance with MIL-STD-2042B. Immediately available in 4 fiber and 8 fiber, 2 meter configuration, singlemode and multimode. Other configurations available upon request.

4 Fiber Inlet Guide
PART#: 0745-2180
mil

Used as the entry point to the blow-head, the purpose of the 4 fiber inlet guide is to provide a transition from the fiber reels and guide the fibers onto the tractor belts where they are pushed into the pressure chamber before being routed into the cable microducts.

4 oz. Water Bottle With Squeeze Cap
PART#: 0700-9700

NAVSEA#: 7085185-29, 6872813-30, 6872811-26, 7325763-27

mil com

Use the 0700-9700 when the instructions call for a wet polish on singlemode connectors/termini.

8 Fiber Furcation Unit
PART#: 0705-8130
mil

KITCO Fiber Optics now manufactures U. S. Navy Shipboard approved furcation units. These units consist of low smoke, zero halogen 2.4 mm furcation tubing that surrounds Kevlar® and a 650 mm (ID), 900mm (OD) hollow tube. One end of the unit is strain relieved with polyethylene tubing, shrink tubing and an aggressive epoxy. An 8 mm Blown Optical Fiber tube is also epoxied inside the shrinkable tubing to allow the installer to couple the furcation unit with the existing duct work. After sliding the 500 mm Blown Optical Fiber down the hollow tube the installer can utilize the Kevlar®and jacket to properly connectorize shipboard ST and SC connectors in accordance with MIL-STD-2042B. Immediately available in 4 fiber and 8 fiber, 2 meter configuration, singlemode and multimode. Other configurations available upon request.

8 Fiber Inlet Guide
PART#: 0745-2190
mil

Used as the entry point to the blow-head, the purpose of the 8 fiber inlet guide is to provide a transition from the fiber reels and guide the fibers onto the tractor belts where they are pushed into the pressure chamber before being routed into the cable microducts.

8mm Duct End Cap
PART#: 0745-2335
mil

The Duct End Caps fit securely into the 5mm and 8mm Duct Connectors to prevent contamination after microducts are installed.

8MM Tube Coupler - Clear
PART#: 0745-2350

NAVSEA#: 7344573-20

mil

These pneumatic connectors feature locking collars to prevent accidental disconnection. They are installed onto 8mm Microducts. The transparent design permits visual verification of fiber population. Maximum operating pressure is 10 bar (g) or 145 psi.

Legend: com = Commercial | mil = Military | new = New Product

Page:

1 2 3 4 5 6

Displaying 1 - 10 of 58

Visita KITCO en español		Contact KITCO USA
Sales/ Toll free: (888) 548-2636 \| Training/ Toll free: (866) 643-5220 \| Out of U.S.: (757) 518-8100 \| Fax: (757) 518-9700
Our Company \| News and Events \| Employment \| NSN \| MSDS \| Catalogs \| Directions \| Partners \| SeaPort-e \| Site Index


Admin	Field Services	Commercial Tools & Tool Kits	Military Tools & Tool Kits	All Tools & Tool Kits
Home Company Request Information NSN MSDS Catalogs Directions Partners	Overview Qualifications Portfolio Commercial Connector Terminations Military Connector Terminations Testing and Troubleshooting Fusion and Mechanical Splicing Blown Optical Fiber (BOF) Technical Support	New Commercial Products Accessories Connectors Consumables Test and Inspection Equipment Ovens and Accessories Kits Tools	New Military Products Accessories Connectors Consumables Test and Inspection Equipment Kits Tools	New Products Accessories Connectors Consumables Test and Inspection Equipment Ovens and Accessories Kits Tools MQJs